It is necessary that the washing machine feed pipe should be connected to the washing machine faucet to let the water come into the machine. Without such valve, the pipe cannot be connected and the water supply cannot be given to the machine. The valve for washing machine is different from ordinary ones.
The reason for this is that the end of the faucet should be fitted to the feed pipe of the washing machine. Regular kitchen valves will not be suitable for feeding water to the washing machine. It should durable and rust free. When there is a leak in the faucet, then proper water supply will not be provided to the washing machine and hence the washing process will be delayed in addition to wastage of water.
Types of Washing Machine Faucet
The water pressure should be uniform and you should buy a faucet accordingly if you want to prevent problems with the washing machine. Most washing machine faucets are T shaped to enable free water flow into the washing machine.
The valves may be made of plastic or nickel or brass. These will be wall mounted so that the feed pipe can be connected easily. The plastic version can be easy to install and to use and additionally corrosion problem can be avoided. However, it is to be noted that even though plastic is durable, it may break easily. Use of metallic faucets will be durable but there are high chances of corrosion. Depending on your budget, you can choose the type you need.
Many people have several problems associated with their valves. Since the water used for washing is hard water, the salt may settle down in the faucet reducing the flow of water. You have to install separate ones for hot water and cold water supply to the washing machine.
Corrosion may occur in metallic pipes that can be fixed to some extent. But once the valve starts corroding, you have to look for a plumber to replace it to prevent further damage. If its height is not proper, you will not get a constant water supply to the washing machine. Before fixing it, you should take care of its height and reach. If you feel that the water pressure is not sufficient, check the pipelines for blockage.
If there are any blocks, call for a plumber to fix them up. Leakage is a very common problem that occurs with washing machine faucets. Sometimes, using adhesives will help you to stop leakage if there are minor cracks. But if it becomes loose, then you have to check if the screws are in correct position. Cheap and inexpensive versions may work well for a few days but they will not be durable. You have to go for high quality versions if you want durability.
How to replace a common faucet
Replacement is a common task that you can find in many homes. It would need to be replaced because it may be having a leak or you may wish to enhance the look of your room. When you have a leaky washing machine faucet, then it is obvious that you have to replace it.
o To start with, you should have a new faucet that is to be fitted instead of the old one. You can go for high quality faucets that are durable and prevent leakage.
o You should have a monkey wrench, basin wrench and pipe wrench ready for replacing a faucet.
o For replacing the faucet, you have to first cut down the water supply. Close the main valve to shut off water. If you have a separate valve for the pipeline in which the old faucet is connected, you can shut down that valve alone.
o After cutting the supply, turn the faucet on so that you drain out all the remaining water in the system. senator wss steam With the basin wrench, remove the washers that attach the faucet to the cabinet.
o If you have any leaky valves, you can use the same tools to replace the valves also.
o Then attach the new faucet in the place and screw it up. Also use your hand to tight the new faucet. Make sure that the washers are placed in proper places when you attach the new faucet.